Rapidly Growing Leading Automotive Portfolio with >20 Validated Materials.
Quick3D Automotive’s large library of automotive-grade and precise model materials represent outstanding value and quality for every industrials application.
3D Printing PEEK-CF
0
%
Greater
Specific Strength
vs. Aluminum 6061
3D Printing PEEK-CF
0
%
Higher Continuous Used
Temperature
vs. Aluminum 6061
Aluminum 6061, an alloy used in the construction of aircraft structures, automotive parts, marine structures, and consumer products.
Proven Automotive-Grade materials
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. Combining impact resistance with heat resistance (~100˚C), PolyLite™ ABS is a good choice for mechanical parts, robotics, functional prototyping or home appliance spare parts.
- Machinable
- Heat resistant up to 100°C
- Impact resistant
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for outdoor applications. PolyLite™ ASA has the same mechanical and thermal properties as PolyLite™ ABS with the ability to resist sunlight (UV) and weather in general. Its good weather resistance makes it ideal for parts that need to weather the elements.
- Water resistant
- UV Resistance
- Good thermal and mechanical properties
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PolyMide™ CoPA is a copolymer of Nylon 6 and Nylon 6.6 combining high tensile strength properties from Nylon 6 with heat resistance properties from Nylon 6.6. Warp- Free™ technology provides ease of printing by slowing down the crystallization allowing CoPA to be easily printed on open bed printers. Displaying outstanding mechanical and thermal properties, CoPA is suited for parts in demanding environments.
- High heat resistance
- Balanced mechanical properties
- Dimensionally stable during printing
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PolyMide™ PA612-CF is a carbon fiber reinforced polyamide filament based on a copolymer of PA6 and PA12. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-free technology enhance the dimensional stability of the prints produced with this material.
- Low moisture sensitivity
- Excellent mechanical properties
- Light Weight
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PolyMide™ PA6-CF is a 20% carbon fiber reinforced Nylon 6 filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion thanks to Fiber Adhesion™ Technology. PolyMide™ PA6-CF outperforms almost every 3D printing material, offering extreme durability and functionality while featuring a heat deflection temperature of 215°C.
- High heat deflection temperature
- Excellent isotropic mechanical properties
- Dimensionally stable
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon 6 filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion or printability. PolyMide™ PA6-GF is strong, durable and features a heat deflection temperature of 191°C. It can be used in applications where stiffness and durability are paramount.
- High heat resistance
- Excellent isotropic mechanical properties
- Dimensionally stable
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PolyMide™ PA12-CF is a carbon fiber reinforced Nylon 12 filament. The main advantage of Nylon 12 over Nylon 6 filaments is its low moisture sensitivity. This improves the handling, storing and printing capabilities while still offering superior mechanical properties compared to other filaments.
- Low moisture sensitivity
- Excellent surface finish
- Excellent dimension stability
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
Ultra performance filament with heat deflection temperature over 250°C, chemical resistance to a wide range of acids, alkalines, fuels and solvents. Naturally flame retardant (V0 UL94) incredbly strong with metal-matching stiffness. PPS-CF10 is dimensionally stable, insensitive to moisture and can print on open bed machines, displaying unrivaled cost/performance properties on the market.
- Flame retardant (V0 UL94)
- incredbly strong with metal-matching stiffness
- Excellent dimension stability
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
Experience superior surface texture and stiffness with PET-CF17, the high-speed 3D printing material that delivers strength without moisture sensitivity concerns. This carbon fiber reinforced filament excels at rapid prototyping, offering exceptional print quality and dimensional accuracy. Combining the best of strength, speed, and surface finish into one exceptional composite filament.
- superior strength
- Precision, and surface texture
- HDT(°C) 147.5
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
INTAM™ PEKK is made from Arkema Kepstan® ingredients. As the leading material in the PAEK family, it enhances the molecular chain of PEEK, reduces crystallization speed and melting point, and improves fluidity, making it more suitable for 3D printing.
- Extremely High Z-Strength
- Prominent All-Round Properties
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
Polyether ether ketone is one of the best-performing plastics ever made. PEEK has excellent mechanical, thermal, and chemical resistance, making it the material of choice in some of the most demanding applications.
- High-Performance Materials
- Prominent All-Round Properties
- Raw Materials with FDA Certification
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
The use of 10% high-modulus short-cut carbon fiber greatly improves the stiffness and heat resistance of PEEK. It is used in some of the most demanding applications in industries such as automotive, aerospace, defense, semiconductors, and oil/gas.
- 10% Chopped Carbon Fiber Reinforced
- Ultra-High Modulus, Increased Stiffness
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PEEK+GF10 fiber-reinforced PEEK has better mechanical and heat resistance properties than standard PEEK, while glass fiber reinforcement improves crystallization speed and surface quality. Additionally, glass fiber reinforcement provides better insulation.
- 10% Chopped Glass Fiber Reinforced
- Ultra-High Modulus, Increased Stiffness
FDA-cleared Bite Splints, Night Guards, and Mouth Guards.
PPS (polyphenylene sulfide) is a high-performance polymer with excellent chemical resistance, as well as excellent mechanical and thermal properties. PPS is completely insoluble in any known solvent at 200°C. It is inherently flame retardant and self-extinguishing, making it an ideal material for electrical and electronic applications.
- Wear Resistant and Self-Lubricating
- Excellent Corrosion Resistance
- Excellent Stiffness
Request a Sample Now
Feel the future of 3D printing in your hands–request a free printed sample sent directly to you or your practice.
Materials Hubs Finder
For dental professionals looking to protect their patient smiles from stress-related dental conditions, SmileGuard resin is the 3D-printed splint with the most bite. Offering the perfect blend of strength and comfort, this breakthrough light-curable resin formulation delivers stunning clarity and superior quality with optimal strength and shape retention for durable protection coupled with soft flexibility for a comfortable and perfect fit.
